Tube Beveling and Chamfering Machines
What is a tube chamfering machine?
The tube chamfering machine deburr chamfer and creates precision tubing for the tubing industries. In most cases you will need both internal and external chamfering capabilities for pipe ends and tube finishes.
The chamfering machine is composed of a machine body, an outer corner chamfering worktable, a positioning pallet, an inner corner chamfering worktable, an inner corner rotating cutter head, an outer corner rotating cutter head, a motor and a transmission mechanism. It is installed vertically on the horizontal upper plate of the body, The outer corner rotating cutter head has a transmission mechanism at its lower end shaft. The inner corner rotating cutter head is exposed from the inner corner cutter head exposure hole in the center of the vertically lifting inner corner chamfering workbench. It is located directly above the above-mentioned outer corner rotating cutter head and the lower side of the positioning platform. The groove is combined with the exposed hole of the external corner cutter head of the external corner chamfering workbench, and the end surface forms an exposed hole of the external corner cutter head exposed by the external corner rotating cutter head. A lifting device is set between the external corner chamfering workbench and the horizontal upper plate of the machine body to make the external corner The chamfering workbench is raised and lowered vertically so that the outer corner rotary cutter head in the outer corner cutter head exposure hole can be adjusted.
What is the process of chamfering machine?
Product detected > Stop centering and positioning > Loading head goes down to vacuum > Loading head goes up > Transfer machine moves forward > Loading head goes down to release vacuum > Loading head goes up and transfer machine goes backward > Press arm presses down > Workbench rotates > Internal and external swing Arm feeds in for grinding > Swing arm retracts after grinding > Lift the pressing arm > Reverse the worktable to reset > Lower the unloading head to vacuum > Move the transfer machine forward to take out the product > Simultaneously load the product cycle.
The CNC tube chamfering equipment can offer further capabilities such as tube tapering or tube facing.
The characteristics of chamfering machine are as follows:
- Fully automatic and suitable for long materials.
- Stronger cutter head design, the cutter head is firmly fixed and the life of the cutter head is increased.
- The belt vibrates the entire material to ensure orderly arrangement.
- Automatic feeding, saving manpower.
- PLC control, no contacts and no defects.
- Dual-stage feed speed saves man-hours and the slow speed makes it easy to adjust the process to perfection.
- The specially designed feeding mechanism is reliable and reliable. The intermediate conveying station can select the required type according to the outer diameter of the pipe. Type exchange is easy and time-saving.